---
title: "Error message \"No Pharos Print Server configured in Registry\" displayed on an Omega device"
slug: "error-message-no-pharos-print-server-configured-in-registry-displayed-on-an-omega-device"
updated: 2024-04-04T08:15:13Z
published: 2024-04-04T08:15:13Z
canonical: "kb.pharos.com/error-message-no-pharos-print-server-configured-in-registry-displayed-on-an-omega-device"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://kb.pharos.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Error message "No Pharos Print Server configured in Registry" displayed on an Omega device

When the user tries to logon using the Omega device for a print/copy job, the Omega device displays the following error message.

"No Pharos Print Server configured in Registry. Please contact Pharos support."

---

Users might get this error message when:

- The EDI was installed on the server without a Pharos Print Server present AND
- A charging model was set so that the user can select a cost center from the Omega device

**Workarounds**

- If the user installed a Print server on the same machine as a EDI server,

> set the following registry key to "Uniprint" using regedit.exe
> 
> HKEY_LOCAL_MACHINE\SOFTWARE\Pharos\EDI\ServerType

- If the user installed a Print server on a different machine,

> 1. Install a EDI server again and select the corresponding Print server during installation.
> 
> 2. Change the Omega device setting to use new EDI server.
> 
> (Go to the Omega device setup -> edit pedi.ini -> edit url to new EDI server)

## Related

- [Ability to switch to the GSNX application on some Ricoh devices](/ability-to-switch-to-the-gsnx-application-on-some-ricoh-devices.md)
- [Xerox iMFP: Failure to manage a Xerox multifunction device](/xerox-imfp-failure-to-manage-a-xerox-multifunction-device.md)
- [Print Jobs Disappearing from Pharos Queue immediately](/print-jobs-disappearing-from-pharos-queue-immediately.md)
- [When printing using an HP Plotter Print Driver the Popup shows twice](/when-printing-using-an-hp-plotter-print-driver-the-popup-shows-twice.md)
- [Error when running EDI verification test](/error-when-running-edi-verification-test.md)