---
title: "How to Remove a Batch of Device Data"
slug: "how-to-remove-a-batch-of-device-data"
updated: 2025-06-01T19:54:50Z
published: 2025-06-01T19:54:50Z
canonical: "kb.pharos.com/how-to-remove-a-batch-of-device-data"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://kb.pharos.com/llms.txt
> Use this file to discover all available pages before exploring further.

# How to Remove a Batch of Device Data

### Problem

There may be instances where you will need to remove a batch of device data from your instance. For example, you might decide you need to remove all device data that falls within a certain IP range.

### Solution

1. Navigate to Discover > Device Inventory
2. Click on the filter button on the IPv4 Address Column
3. Create an appropriate filter (in this example, I want to delete all IP addresses in the range 10.1.x.x)  
![Picture 1, Picture](https://cdn.document360.io/f4fb58ca-1114-4e59-ba1a-d8f647bd6dcf/Images/Documentation/image-1748807648274.png)
4. Multi select all the devices on the page and click on Set Service
5. Multi select all the devices on the page once again and click on Delete

**Note:** This process will also work if you wanted to delete by other columns – for example, Manufacturer, Active in 30 Days.