---
title: "HP iMFP - Error logging in \"Sequence contains no elements\""
slug: "hp-imfp-error-logging-in-sequence-contains-no-elements"
tags: ["Blueprint", "uniprint"]
updated: 2024-04-04T13:28:09Z
published: 2024-04-04T13:28:09Z
canonical: "kb.pharos.com/hp-imfp-error-logging-in-sequence-contains-no-elements"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://kb.pharos.com/llms.txt
> Use this file to discover all available pages before exploring further.

# HP iMFP - Error logging in "Sequence contains no elements"

When Logging into an HP iMFP Terminal we see the error "Sequence contains no elements..." as in the attached screen shot 'image002.jpg'.

---

The Copy Line Configuration for the Device has not been configured is most likely the root cause. Open the Pharos Administrator and navigate to the Devices context, Output Management > Devices. Select the Device in question, and expand the "Copier" section below. Configure the "Copy Line Configuration" with needed copy lines. Typically these start at 0 and increment upwards, see attached screen shot 'CopyLines-v2'.

## Related

- [Pharos HP iMFP - On the panel I am seeing a 45.00.33 or 45.00.3C error - Error: SSL certificate or SSH md5 fingerprint not OK](/pharos-hp-imfp-on-the-panel-i-am-seeing-a-450033-or-45003c-error-error-ssl-certificate-or-ssh-md5-fingerprint-not-ok.md)
- [Using the Pharos HP iMFP solution the display shows a 200.2 error when attempting to login.](/using-the-pharos-hp-imfp-solution-the-display-shows-a-2002-error-when-attempting-to-login.md)
- [How do I update the HP printer firmware with the Pharos HP iMFP software installed?](/how-do-i-update-the-hp-printer-firmware-with-the-pharos-hp-imfp-software-installed.md)
- [Pharos HP iMFP supported devices and firmware](/pharos-hp-imfp-supported-devices-and-firmware.md)
- [Canon iMFP - MFD Error Message - Cannot store job information for the user currently logged on user or apply settings changes.](/canon-imfp-mfd-error-message-cannot-store-job-information-for-the-user-currently-logged-on-user-or-apply-settings-changes.md)