---
title: "What does “Required Printer network Settings” mean on the Pharos Omega PS150 web page?"
slug: "what-does-required-printer-network-settings-mean-on-the-pharos-omega-ps150-web-page"
updated: 2024-04-04T06:07:54Z
published: 2024-04-04T06:07:54Z
canonical: "kb.pharos.com/what-does-required-printer-network-settings-mean-on-the-pharos-omega-ps150-web-page"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://kb.pharos.com/llms.txt
> Use this file to discover all available pages before exploring further.

# What does “Required Printer network Settings” mean on the Pharos Omega PS150 web page?

When I log on to my Pharos Omega PS150 to set up the firewall, I notice the following information after I enable firewall mode:

“Required Settings on Controlled Device”

> IP Address:
> 
> Subnet mask:
> 
> Default gateway:

What do these mean?

---

The values for IP Address, Subnet Mask, Gateway should be used to set up the Printer IP address and network configuration. The printer should be statically set using these values so that it can communicate with the Pharos Omega when firewall mode is enabled.

## Related

- [PS150 Web Page Error Message: "The connection has timed out"](/ps150-web-page-error-message-the-connection-has-timed-out.md)
- [How to turn on logging for Omega PS150/PS200 Network Terminals?](/how-to-turn-on-logging-for-omega-ps150ps200-network-terminals.md)
- [Why can I browse to my Printer or MFP configuration page after turning on firewall mode on the Omega PS150?](/why-can-i-browse-to-my-printer-or-mfp-configuration-page-after-turning-on-firewall-mode-on-the-omega-ps150.md)
- [If I upgrade my Pharos Omega PS150 with updated firmware will I lose my settings?](/if-i-upgrade-my-pharos-omega-ps150-with-updated-firmware-will-i-lose-my-settings.md)
- [Pharos iMFP and Sentry Supported Devices](/pharos-imfp-and-sentry-supported-devices.md)