Logging MEAP on a Canon device

How to enable logging on Canon printer using the Pharos Canon iMFP software.

Please do the following:

1. Open http://xxx.xxx.xxx.xxx:8000/Pharos/Config  (where xxx.xxx.xxx.xxx is the IP Address of the device)

2. Login : Login ID = pharos Password = pharos

3. In the Config screen select the following:

   1. Enable Logging = Yes

   2. Logging output  = check  box “local file”

   3. Threshold = All

   4. Then select Apply at the bottom of the screen.

--------------------------------------------------------------------------------------------------------------

Meap Config Page:  http://[IP address]:8000/sms
Password:  MeapSmsLogin (usually unless previously changed)

Phars Config Page:  http://[IP Address]:8000/Pharos/Config
Password (set in Pharos Administrator under “network devices”)

Please Note: This address is case sensitive the P and C need to be capitalized.
i.e.  http://134.53.26.237:8000/Pharos/Config